The 12+8 Adapter is used to bypass FCA Vehicles Security Gateway Module (SGM) which limits an aftermarket scan tool to only reading DTCs and viewing data. 

Most 2018 and newer FCA vehicles include a Security Gateway Module.

If you don't use AutoAuth you can expect to see this message when scanning a Chrysler, Dodge, Jeep, Fiat, or Alfa vehicle with the Security Gateway Module:

DEVICE UNABLE TO COMMUNICATE WITH THE CONTROL UNIT

Placement of the SGM varies, but it is often located in the sidekick panel, passenger side near the glove box, or behind the radio. 

The 12+8 Adapter connects to the Autel MaxiSys VCI.

Adapter needed on:
20% of 2017 Chrysler products
50% of 2018 Chrysler products
90% of 2019 Chrysler products 
100% by 2020  

Only for customers who have purchased YOUCANIC full system scanner. If you purchase this adapter without the scanner, your order will be canceled. If you have purchased the scanner previously, use the same email address so that we can verify the purchase. 

.: Material: premium water-resistant vinyl
.: Waterproof sticky adhesive
.: Suitable for indoor and outdoor use
.: Easy peel backing
.: Matte finish

.: Outside: 100% white polyester
.: Inside: 100% black soft foam liner
.: Edge-to-edge print
.: Size options: Regular Can (3.5'' x 4.3'') and Slim Can (3.5'' x 6'')

.: Durable 20oz loop polyester carpeting face
.: Sturdy non-skid rubber backing
.: Front and rear mat options
.: Made in the USA
.: NB! One piece per listing
.: NB! Due to the production process of the mats, please allow for slight print placement shifts with a tolerance +/- 1/3"

.: Polyester needle-punch surface
.: White base and black trim
.: Non-slip rubber backing
.: Set includes 2 rear car mats
.: NB! Print might slightly shift due to the production process of the mats - please keep the important details within the safe area

.: Materials: 100% bio-washed chino twill (hat), 100% faux leather (patch)
.: Unstructured, six-panel, low-profile
.: Pre-curved bill
.: Blank sourced from Bangladesh
.: Sewn-in label
.: NB! Hand-wash only

The YOUCANIC DOIP (Diagnostics Over Internet Protocol) Adapter is the ultimate tool for diagnosing and maintaining modern vehicles equipped with advanced electronic architectures. Designed for compatibility with the YOUCANIC Scanner, this adapter enables you to access and troubleshoot the latest automotive systems quickly and efficiently.

Key Features:

• DOIP Compatibility: Seamlessly diagnose vehicles that require Ethernet-based communication, ensuring faster and more reliable data transfer compared to traditional diagnostic methods.
• Advanced System Access: Unlock critical control units in high-tech systems like ADAS (Advanced Driver Assistance Systems), hybrid drivetrains, and infotainment systems.
• Comprehensive Support: Ideal for technicians and DIYers working on the latest vehicle models.

Why You Need the YOUCANIC DOIP Adapter
Newer vehicles come with increasingly complex systems that require high-speed communication for diagnostics. Many 2023 models rely on DOIP for troubleshooting and maintenance, making this adapter essential for anyone working on modern cars.

Compatible with 2023 Models, Including:

• Mercedes-Benz: E-Class (W214), S-Class (W223), GLE-Class, and EQS.
• BMW: 3 Series (G20), 5 Series (G60), X5 (G05), and i4.
• Audi: A6, Q8 e-tron, and the all-electric Audi Q4 e-tron.
• Volkswagen: ID.4, Tiguan, and Arteon.
• Land Rover: Range Rover Sport and Defender.
• Porsche: Taycan, Panamera, and Cayenne.
• Volvo: XC90, XC60, and S90.
• Jaguar: I-PACE and F-PACE.

Simple to Use:

• Connect the DOIP adapter to your YOUCANIC scanner.
• Link the adapter to the vehicle’s diagnostic port.
• Access advanced diagnostics and perform tasks like clearing error codes, calibrating sensors, and troubleshooting complex systems.

Take Control of Modern Vehicle Diagnostics
With the YOUCANIC DOIP Adapter, you'll be prepared to diagnose and repair the most advanced vehicles on the road today. Whether you're working on cutting-edge electric vehicles or luxury models with complex systems, this adapter ensures you stay ahead of the curve.

.: Pre-drilled holes
.: Compatible with License Plate (11.8" x 6.1")
.: Easy Installation
.: Lightweight aluminum
.: NB! Check local state legislation regarding License Plate Frame shapes and sizes before ordering

.: 100% preshrunk cotton
.: Light fabric (5.2 oz /yd² (176 g/m²))
.: Relaxed fit
.: Tear-away label
.: Runs true to size

Adapter for 1996-2002 Mercedes-Benz vehicles with 38-pin port under the hood. Available only with the purchase of a YOUCANIC UCAN-II full-system scanner.

Please contact us to verify that our scanner has the software to cover your model if your Mercedes-Benz is made before 2002. 

This adapter is only available for customers who have purchased the YOUCANIC full-system scanner. 

Supported models: https://www.youcanic.com/mercedes-benz-models-with-38-pin-port/

This is a refurbished power electronic module for the 2010-2013 Mercedes-Benz S400 Hybrid.  At a fraction of the dealer price.

If you purchase our rebuilt unit and return your core to us within two weeks, you are eligible for a core refund. This refund will be the difference between the amount you initially paid and the cost of the rebuild option. Ensure the core is returned within the specified two-week timeframe.

Rebuild to last longer than the original. 

We not only sell these units but we stand behind them. We will provide step-by-step installation instructions.

If there is an issue or questions with installation we are here to help. We also install these units and if you need us to install them for you please contact us. 

We can also install this for you if you can get your car towed to Baltimore, Maryland. Contact us for the installation price. 

Shipping: 10-14 Days

90 Day Warranty

Returns: Accepted

Origin: DE(Origin)
Item Type: Drive Elements
Item Width: 35cm
Model Name: 2215404450
External Testing Certification: CC
Item Diameter: 25inch
Item Height: 25inch
Year: 2010-2013
Material Type: Mental
Item Weight: 7kg
Special Features: 2215404450

.: Material: white aluminum with a glossy finish
.: One size: 12.3" x 6.5" (31.1cm x 16.5cm)
.: Silver backing
.: Pre-drilled holes
.: NB! Check local state legislation regarding License Plate Frame shapes and sizes before ordering

.: Material: 100% polyester
.: Left and right covers designed separately
.: One set contains TWO seat covers
.: Quick and easy installation
.: Black back cover
.: NB! These car seat covers should NOT be used on a seat with integrated airbags, seatbelts and armrests

Is your ABS, SRS, Airbag, Check Engine Light, or any warning light on? 

Instead of taking the vehicle to the dealership and paying $175+ for diagnostic, you can order this service and we will diagnose your vehicle as it sits in your auto repair shop or home garage.  

What you will get

• One-on-one support by an experienced ASE-certified technician. We will read all the codes from one vehicle and go over them with you.  Support is available anywhere in the world. 
• Reset / Clear Fault Codes 

100% Guarantee. If our scanner can not read codes from your vehicle or we are not able to help, we will provide a full refund. 

This service does not check the mechanical condition of the vehicle. With that said, on modern vehicles, most problems, including mechanical, will be picked up by at least one module 90% of the time. 

We will be able to read, clear and view sensor data from any module on your vehicle, including: 

• Engine Control Unit (ECU, ECM)
  
• ABS Module - Example: Find out which ABS wheel speed sensor is bad. 
• Transmission Module - Example: Find out why the vehicle is stuck in limp mode.
  
• Traction control unit 
  
• A/C Module - For example, find out why AC blows cold on one side and hot on the other. Or find out which dashboard vent flap is faulty. 
• SAM Modules
• Parking module
• Blind-spot monitoring system 
• Stability control
• Air suspension
• Convertible module
• DPF System 

BONUS: The scanner can perform several resets such as service reminders, steering angle sensors, DPF, battery registration, etc., but coverage depends on the make and model. 

Will I be able to reset any warning lights? 

Yes, but you must fix the problem that triggered the fault first. If the problem is present, the code will be active, and we will not be able to clear the codes. 

Why can't I clear the code? 

To erase a code, first, you need to fix the underlying problem, then we can reset the codes. 

Certain codes can be reset if they are not active. For example, if your airbag light came on because your battery died or you disconnected the battery, we will be able to reset it; if the airbag light came on because the seat occupancy sensor is faulty, we would not be able to reset it until you fix the problem. 

How does this service work? 

1. Order this service.  Pay the diagnostic fee. 
2. We ship you a diagnostic adapter gets plugged into the OBD-II port and connects to your Android phone or Windows 10 device. 
3. Once you receive the scanner, we set up a time to connect remotely and perform a vehicle diagnostic. We will read the codes and explain what they mean. 
4. Ship the adapter back to us within 7 days. 

Requirements 

• Android phone or windows 10 device. 
• Working internet on the device above. 

The adapter does not work with iPhone. 

How soon can I get the adapter? 

We ship the adapter to your priority. In most cases, it will take 3 to 4 days to get the scanner. We can set up a time for a diagnostic within 24 hours. 

What if I am late to return the adapter? 

There is a $10 fee per day if you keep the scanner longer than 7 days. 

Can I stop by your shop? 

Yes. We can provide support in person. Appointment required. Send an email to support@youcanic.com.

To ensure a smooth rental experience and maintain the quality of our Youcanic Scanners, we've implemented a security deposit system for our customers. Here's a detailed breakdown of the deposit process and what you should expect:

1. Purpose: The security deposit is a protective measure. It ensures the Youcanic Scanner is returned in the same condition it was lent out, and it covers potential loss or damages.

2. Deposit Amount: The security deposit is fully refundable as long as the scanner is not missing parts. 

3. Refund Process: Once the Youcanic Scanner is returned, we will inspect its condition. If it's in the same state as when you borrowed it, the security deposit will be refunded in full. This inspection usually takes 24-48 hours, after which your refund will be processed.

4. Deductions: If there's any damage or missing components, we may deduct a portion or the entirety of the deposit, depending on the cost of repair or replacement. We'll provide a detailed breakdown of any deductions, ensuring transparency.

5. Late Returns: If the scanner is returned past the agreed-upon date, there may be additional charges, which could be deducted from the security deposit. Always communicate any delays in advance to avoid unnecessary deductions.

6. Payment Methods: The security deposit can be made via several payment methods, including credit/debit cards, bank transfers, or cash. The refund will be processed using the same method you used for payment unless otherwise arranged.

7. Customer Support: Our team is available to address any concerns or questions you might have about the security deposit or rental process. We prioritize clear communication and are here to assist you.

Renting the Youcanic Scanner should be hassle-free, and the security deposit ensures both parties are protected. We value our relationship with our customers and strive for transparency and fairness in every transaction. Thank you for choosing us for your car needs!

.: 50% cotton, 50% polyester
.: Medium-heavy fabric (8 oz/yd² (271 g/m²))
.: Classic fit
.: Sewn-in label
.: Runs true to size

.: 100% Cotton (fiber content may vary for different colors)
.: Medium fabric (6.0 oz/yd² (203 g/m²))
.: Classic fit
.: Tear-away label
.: Runs bigger than usual

.: Material: 100% aluminum
.: One size: 12" × 6" (30.5 × 15.2 cm)
.: 4 holes for attachment
.: NB! The product does not come with mounting hardware
.: Assembled in the USA from globally sourced parts

.: Double wall insulation
.: Material: Stainless steel
.: Fits perfectly in car cup holder
.: Spill-resistant sliding lid with a rubber gasket to prevent leaks

.: One shape: Rectangular
.: Material: Durable, high-density foam with an ultra-thin rubber base
.: 1/16" (1.58 mm) thick
.: One-sided print

The YOUCANIC Scanner (Open Box) offers all the benefits of a brand-new device at a reduced price. Each unit includes the same components as the original packaging: scanner, videocope, charger, VCI, manual, and full warranty coverage. Rest assured, the scanner has been thoroughly tested, remains unregistered, and is in excellent condition.

The YOUCANIC Scanner (Open Box) provides incredible value with all the original accessories included. Each unit comes with:

• Scanner
• Manual
• VCI Bluetooth Adapter
• Videoscope
• Hard Carrying Case
• Wall Charger

*Free lifetime updates included. 

This open-box unit has been thoroughly tested, remains unregistered, and includes the same warranty as a new device. It offers the same premium functionality and performance YOUCANIC is known for.

With limited stock available, this is a fantastic opportunity to get a powerful diagnostic tool at a reduced price. Act now—supplies won't last long!

Replacement adapter for those who have lost the adapter to their UCAN-II-B. This can not be added to the YOUCANIC scanner wired version. 

Also once you get the adapter please contact us for instructions as how to pair it. 

The YOUCANIC wireless charging pad is made with highly durable, double-wall plastic, and supports 5W wireless charging that is compatible with iPhones and various Android smartphones. Each pad includes one 11.8" USB to Micro USB cable for standard charging as well.

.: Material: Durable double wall plastic
.: Includes a 11.8" USB to Micro USB cable for charging
.: Compatible with iPhone and various Android smartphones
.: Supports 5W wireless charging and works with most plastic phone cases