Free US shipping. 31 day returns, no questions asked. Technicians on the phone.
Free US shipping. 31 day returns, no questions asked. Technicians on the phone.
QUICK ANSWER FOR GENESIS OWNERS
Written by the YOUCANIC technicians in Towson, Maryland, from the UCAN-II Pro coverage database and our own shop work. Updated October 24, 2026.
A Genesis carries Hyundai electronics with more of everything: more radars, more cameras, an electric parking brake, electronic suspension and a smart key system, and the coverage database behind the UCAN-II Pro keeps Hyundai and Genesis in one USA region list with the same module names and the same routines. The parts store code reader sees the engine and nothing else, so the ESC light after an alignment, the parking brake that will not release for pads and the radar that needs aligning after a windshield all end up at the dealer. The tools below are what we use in our own shop in Maryland to reach every module on a Genesis and run those routines. The database lists the G70, G80, G90, GV60, GV70 and GV80 lines plus the earlier Genesis coupe and sedan. Pick by what you need to do.
Reads and clears engine codes from your phone and gives you a live gauge dashboard. It does not see the ABS/ESC, airbag, transaxle, EPB or body modules, and it cannot calibrate a sensor. Right if the only light you care about is the engine one.
Full system, bidirectional, lifetime free updates. Reads and clears every control unit, runs active tests and the Genesis service functions: HCU air bleeding, EPB pad change mode, steering angle and G sensor calibration, radar sensor alignment, transaxle adaptive reset, TPMS sensor ID writing, variant coding. The tool to own if you keep a Genesis running.
Same scanner, shipped both ways free, with a refundable deposit that comes back when the scanner does. For the one parking brake job, radar alignment or airbag code you need done once.
On the tablet you pick the control unit, then the function category, then the routine. These are the routines the Hyundai and Genesis coverage database lists under the Special Function category, grouped by the job you are doing, with Active Test on the module set alongside. Names are as they appear on the tablet. Coverage varies by model and year, so check yours before you order.
| Job | Routines in the coverage database | Where it lives on the tablet |
|---|---|---|
| Brakes, ABS and parking brake | HCU Air bleeding mode, Longitudinal G sensor calibration (HAC/DBC Only), Auto detected configuration (ESC Only), Auto detected configuration reset, ESC Variant coding, G-Sensor calibration, PAD Change mode (Before change), PAD Change mode (After change), EPB Variant coding | ABS/ESC (Anti Lock Brake/Electronic Stability Control) and EPB (Electric Parking Brake) › Special Function |
| Engine, fuel and emissions | Evap. Leakage test, Leakage test for the evaporative gas system, ETC Test (Option), ISG Test (Option), Resetting adaptive values, Read VIN, Write VIN, Checking the history of CKPS signal missing error, Integrated thermal module coolant filling mode, Alternator test, Assembly check (ECU Replacement) | ENG (Engine) › Special Function and Active Test |
| Transmission and drivetrain | AT Adaptation mode, Resetting auto trans adaptive values, Oil Pressure characteristics back up and input (TCU Replacement), Oil Pressure characteristics input (A/T Replacement), Oil Pressure characteristics input (Solenoid valve replacement) | A/T (Transaxle) › Special Function; ELSD and 4WD modules carry Active Test |
| Steering, suspension and driver assistance | Steering angle sensor (SAS) calibration, EPS Type recognition, Radar sensor alignment (SCC/AEB), Variant Coding, User option | EPS (Motor Driven Power Steering), AEB (Autonomous Emergency Braking), SCC (Smart Cruise Control), BSD, LDWS and the camera modules › Special Function |
| Body, comfort, lighting and climate | ACU Variant coding, CLU Variant coding, CLU Variant coding (Manual), Variant coding (Back up and input), Code saving, Service reminder setting, A/C Compressor Test (ECV Type), Pressure Sensor Characteristics Input (Pressure Sensor Replacement), Body sensor reset, PODS Reset, Pass. Airbag realtime info, Vehicle name writing, User option | AB (Airbag), CLU (Cluster Module), BCM and IBU BCM, A/C (Air Conditioner), ODS (Occupant Detection Sensor), AHLS, PSM › Special Function |
| TPMS and tires | TPMS Test, TPMS Mode configuration, Wheel sensor ID writing, Register sensor (Test mode), Sensor status (Test mode), plus the sensor trigger and U360 programming from the tablet | TPMS (Tire Pressure Monitoring System) and IBU TPMS › Special Function |
Two vehicles pulled from the Hyundai and Genesis coverage database, with the control units the UCAN-II Pro lists on each. Every unit gets fault codes, live data and, where the database shows it, active tests and special functions.
| Vehicle in the database | Control units | Examples of what it lists |
|---|---|---|
| 2023 Hyundai Kona N 2.0 T-GDI (same database family) | 24 | A/C (Air Conditioner), A/T (Transaxle), AB (Airbag), ABS/ESP, AMP (Amplifier), AVN (Audio Video Navigation), CLU (Cluster Module), ECS (Electronic Control Suspension), ELSD (Electronic Limited Slip Differential), ENG (Engine), EPS (Motor Driven Power Steering), ESG (Electronic Sound Generator), F CMR (Front View Camera), FR (Front Radar), HUD (Head Up Display), IAU (Identity Authentication Unit), IBU BCM (Body Control Module), IBU TPMS, IGPM (Integrated Gateway Power Control Module), ODS (Occupant Detection Sensor), RCR (Rear Corner Radar), RVM (Rear View Monitor), SMK (Smart Key Unit), WPC (Wireless Power Charger) |
| 2005 Hyundai XG 3.5 DOHC (same database family) | 6 | A/T (Transaxle), AB (Airbag), ABS (Anti Lock Brake), ENG (Engine), IMMO (Immobilizer), TCS (Traction Control) |
Both samples are Hyundais because Genesis shares the Hyundai database and its module naming; a GV80 or a G90 carries the same families of units with more radars, cameras and seat modules, and the coverage checker shows the exact list for your year.
Smart key teaching, immobilizer and password work, module reflashing and anything else that needs a live connection to the Hyundai server are dealer tool jobs, and no aftermarket scanner does them. For diagnosis, live data, active tests, calibrations, variant coding and the service functions above, which is what most owners and independent shops actually do week to week, the UCAN-II Pro covers it at one price with no renewal fee. Functions vary by model, engine and year, so check your car or email support@youcanic.com with your VIN and the function you need before you order.
Yes. PAD Change mode (Before change) in the EPB module retracts the motors so the pistons can be pushed back, and PAD Change mode (After change) sets them again when you are done. The parking brake guide walks through it.
No. Every Genesis in the coverage database plugs straight into the 16 pin port, gateway module included.
Yes. Radar sensor alignment (SCC/AEB) is in the database for the Hyundai and Genesis family, run from the driver assistance module with the target set up as the procedure asks.
Yes. HCU Air bleeding mode in the ABS/ESC module cycles the hydraulic unit while you work the bleeders, and the ABS bleeding guide shows the sequence.
No. Smart key teaching and immobilizer work need the dealer tool with Hyundai server access. The UCAN-II Pro does diagnosis, live data, active tests, calibrations, variant coding and the service functions listed above.
Yes. The rental is a one week rental plus a refundable deposit that comes back when the scanner does, shipped free both ways. Most Genesis renters want a parking brake job, a radar alignment or an airbag light cleared.
Use the coverage checker by model, year and engine in the USA region, or call 1-888-959-4265, Monday to Friday 9 AM to 4 PM Eastern, and a technician will tell you plainly. If it does not do what you need, we will say so. Every scanner also comes with 31 day returns, no questions asked.
Working on a Hyundai or a Kia? The same database family and the same kit cover them; see the scanners by make hub, the service functions explained one job at a time, and the step by step repair guides on youcanic.com.
Dealer Level Diagnostics In Your Garage. One Price. No Subscription. The YOUCANIC UCAN-II Pro is a full system, bidirectional OBD2 scan tool w...
View full detailsRent The Scanner A Dealer Would Plug Into Your Car. $85 For 7 Days. One airbag light, one transmission adaptation, one no start you want to un...
View full detailsThe Gauge Cluster Your Car Should Have Come With, On Your Phone The YOUCANIC UCAN-GO is a Bluetooth 5.1 OBD2 adapter that streams live speed, ...
View full detailsFind Out Why The Check Engine Light Is On. In Your Driveway. For $20. The YOUCANIC UCAN-I plugs into the OBD2 port of any 1996 or newer car or...
View full detailsSee Inside The Engine Before You Take It Apart The YOUCANIC USB Videoscope is an IP67 waterproof inspection camera that plugs into your YOUCAN...
View full detailsBattery, Starter Or Alternator? Know In Two Minutes. The YOUCANIC Voltcheck Pro clips onto any 12 V or 24 V battery and tells you its state of...
View full detailsOne TPMS Sensor For Both Frequencies. Programmed By The Scanner You Already Own. The YOUCANIC U360 is a blank, universal tire pressure sensor ...
View full detailsNeed One TPMS Sensor And No Tool To Program It? Send Us The ID. We Ship It Ready. A dead tire pressure sensor normally means a trip to a shop ...
View full details
